1-10V接口的模拟调光

This ballasts providing 10V voltage at the marked input of the operating device. This voltage can use with a control unit (1-10V) which represents a current sink that regulates the output voltage. The ballasts provides now the proportinal light level.

Each 1-10V Light Controller can be operated with BAG electronics ballast, because BAG electronics meets all relevant standards.

Note: Programmable logic controls (SPS) with 0-10V output have generally a voltage source (accordingly no current sink) and are therefore not suitable for 1-10V control.

Control:
It is controlled via a galvanically isolated interface 1-10 V / DC.
Connection via mains power cable. (Interface is not in accordance with SELV)

A segmentation of the devices on multiple phases is possible. Over the 1-10 V interface, the control of complex lighting systems is no problem.
Different light sources, as compact fluorescent lamps, low voltage halogen lamps and 230V incandescent lamps can be dimmed simultaneously with BAG electronics components.

Control options

  • Hand-held control units
  • (Electronic potentiometer)
  • IR remote control
  • Light sensors for daylight control

The combination of the listed control modules with signal amplifiers can be extend by the number of controllable electronic ballasts.

相关下载